INTERSPIRO Divator Pro Bedienungsanleitung Seite 18

Divator Pro regulator and Divator Pro Nitrox regulator
3. Assemble the BC hose on the inflator.
Connecting the octopus breathing hose and valve
1. Connect the hose to the octopus breathing valve by screwing it on finger
tight. Close the lever on the octopus breathing valve.
2. Make sure the hose is held in place and that there are no protruding parts
that can get stuck.
Divator DP1 surface supply
Notice
The diver must frequently check the pressure on the pressure
gauge to ensure that the pressure does not decrease in the
SCUBA gas supply.
18