INTERSPIRO Divator Pro Bedienungsanleitung Seite 16

Divator Pro regulator and Divator Pro Nitrox regulator
2. Assemble the regulator on the cylinder valve and tighten it by hand.
Place the hoses in the grooves between the cylinders on either side of the
spacing rod. Install the hoses in the hose holders (if available).
Note: Any drysuit hose should not be placed in the grooves, let it lay out to
the side.
Connecting the breathing hose
1. Connect the breathing hose to the full face mask (or breathing valve) by
tightening it finger-tight.
16