Dell Precision Workstation 390 Schnellreferenzhandbuch Seite 23

7 USB 2.0 connectors (2)
8 power button
9 power light
10 diagnostic lights (4)
11 microphone connector
12 headphone connector
13 network link light
Use the USB connectors on the front of the computer for devices that you connect
occasionally, such as flash memory keys or cameras, or for bootable USB devices
(see "System Setup" in your User's Guide for more information on booting to a USB
device).
It is recommended that you use the back USB connectors for devices that typically
remain connected, such as printers and keyboards.
Press this button to turn the computer on.
NOTE:
The power button can also be used to wake the system or to place it into a
power-saving mode. See "Power Management" in the User's Guide" for more
information.
NOTICE:
To avoid losing data, do not use the power button to turn the
computer off. Instead, perform an operating system shutdown.
The power light illuminates and blinks or remains solid to indicate different states:
• No light — The computer is turned off.
• Steady green — The computer is in a normal operating state.
• Blinking green — The computer is in a power-saving mode.
• Blinking or solid amber — See "Power Management" in the User's Guide."
To exit from a power-saving mode, press the power button or use the keyboard or
the mouse if it is configured as a wake device in the Windows Device Manager. For
more information about sleep modes and exiting from a power-saving mode, see
"Power Management" in the User's Guide for more information. See "Diagnostic
Lights" on page 37 for a description of light codes that can help you troubleshoot
problems with your computer.
Use the lights to help you troubleshoot a computer problem based on the
diagnostic code. For more information See "Diagnostic Lights" on page 37.
Use the microphone connector to attach a personal computer microphone
for voice or musical input into a sound or telephony program.
Use the headphone connector to attach headphones and most kinds of speakers.
The network light is on when the computer sends or receives data over a network
connection. The light might also be on when a network device is establishing a
network connection.
Quick Reference Guide
23