Werbung
|
4
Connect the cables to the monitor and route through front slot.
|
7
Connect the cables to the computer.
|
10
Connect the network and power cable.
|
5
Leaving suffi cient slack, tuck the monitor cable into the cable channel.
|
8
Attach the cable cover to the computer chassis.
|
11
Install your security accessories.
www.dell.com | support.dell.com
NOTE: Store any
access cable in
the cable tray.
|
6
Slide the computer chassis into the AIO stand.
|
9
Slide the switch to lock the computer to the AIO stand.
The contents herein are subject to change without notice.
© 2011 Dell Inc. All rights reserved. Printed in China.
Printed on recycled paper.
Reproduction of these materials in any manner whatso-
ever without the prior written permission of Dell Inc. is
strictly prohibited. Dell is a trademark of Dell Inc.; Dell Inc.
disclaims any proprietary interest in trademarks and trade
names other than its own.
January 2011
Ø 3 mm - 8 mm
Printed in China.
Printed on Recycled paper.
P/N: 777-33-002-W Rev. A00
Werbung
