Scheppach ANS15-50 Originalbetriebsanleitung Seite 18

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Failure to comply with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise your-
self with your product and to use it for its intended purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual with the product at all times
and store it in a plastic cover to protect it from dirt and
moisture. They must be read and carefully observed by
all operating personnel before starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
18 | GB
2. Product description (Fig. 1)
1. Exhaust air cover (rotatable)
2. Trigger
3. Handle
4. Threaded plug nipple
5. Magazine lever
6. Magazine
7. Level indicator
8. Release safety catch
9. Mouth
10. Front plate
11. Front plate quick clamp lever
3. Scope of delivery
Item Quantity
1x
1x
2x
500x
500x
1x
4. Proper use
The air nail gun is a compressed air-operated tool for
a variety of uses.
This product is used to drive countersunk nails and
staples into wood and similar materials. Only use
the nails or staples that are explained under the item
"Technical data" or shown on the information plate on
the magazine. Other driven-in driven-in fasteners may
not be used.
Likewise, use on hard materials such as stone, metal,
etc. is not permitted.
Note!
Hose inside diameters that are too small and hose
lines that are too long lead to a loss of perfor-
mance on the product.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
www.scheppach.com
Designation
Air nail gun
Oil bottle
Allen key
Nails (15 - 50 mm)
Tacker needles
(Length 16 - 40 mm)
Operating manual