Parkside 466625 2404 Bedienungs- Und Sicherheitshinweise Seite 13

Building up the operating pressure
Pull the pump handle
until the pressure sprayer has been pumped up to a
pressure not exceeding the maximum permissible
operating pressure of 2 bar.
Note: If the pressure of the air in the container
exceeds 2 bar, the pressure is automatically re-
leased through the safety valve
Press the pump handle
Spraying
Hold the handle
nozzle e.g. at a plant.
8
Note: You can rotate the spray head to change to
different spray function: Straight line by rotating an-
ti-clockwise direction (Fig. C1), Mist by rotating
clockwise direction (Fig. C2).
CAUTION! Only the front part of the nozzle
brass is used to adjust the spray function! Do not
unscrew the whole of the nozzle holder
any circumstances. Otherwise there is a risk of injury.
Note: The flexible hose
move flexibly to assist with the uptake of liquid in
the tank if the pressure sprayer is held in differ-
6
ent positions (Fig. D).
Note: Push the spray barrier
spray button
and move up and down
1
1
and direct the adjustable spray
4
10
. The spraying process begins.
3
.
5
downwards.
and the weight
back to press the
2
6
in
8
under
8
can
11
GB/IE/NI 13