Technical Data - Meec Tools Rmv500M20V Bedienungsanleitung

11

Technical data

EN
Specification
SV
Rated voltage
Wifi connection
NO
Cutting area
Max. tilt
PL
Cutting height
Cutting width
Battery type
DE
Charger output
Dimensions (LxWxH)
FI
Weight
Noise levels1
FR
Sound pressure level, LpA
Measured sound power
NL
level, LwA
Guaranteed sound power
level, LwA
Warning! Always wear hearing protection!
Warning! The actual vibration and noise level
when using tools may differ from the specified maximum
value, depending on how the tool is used and the mate-
rial. It is therefore necessary to determine which safety
precautions are required to protect the user, based on
an estimate of exposure in actual operating conditions
(taking into account all stages of the work cycle, e.g. the
time when the tool is switched off and when it is idling, in
addition to the start-up time).
1
The declared values for vibration and noise, which
have been measured according to a standardized
test method, can be used to compare different tools
with each other and for a preliminary assessment
of exposure. The measurement values have been
determined in accordance with EN 50636-2-
107:2015
30
Value
20 V
2.4GHz Wi-Fi
500 m²
42 %
20–60 mm
180 mm
20 V Lithium 2.5 Ah
1.1 A
60.5 x 37 x 23.5 cm
7.8 kg
47 dB(A), K=1.15 dB
53.7 dB(A),
K=1,15 dB
55 db(A), K=1.15dB