App Settings; Transport; Storage - Meec Tools Rmv500M20V Bedienungsanleitung

Note! The product will go along the limit line of the lawn
EN
and will return to the charging station, the display will
show "FC"
SV
3
Push "OK" to confirm the mowing zone.
NO
4.4.2 Multi-zone
If you are going to use the product on more than 1 area,
PL
follow the instructions in the "Robotic Mower" app to
identify different zones. Refer to "3.3 To install the
magnetic tags" on page 21.
DE

4.5 App settings

In the Homepage of the app you can see the work area,
FI
the status of the product, monitor the work progress this
includes the percentage of the completed lawned area
and you can remotely control the product to start, pause,
FR
or return to the charging station.
● You can connect multiple products to 1 account but
each product can only be linked to one primary
NL
account. Click the "Share" button in the app to let
other users add the product by scanning the provided
QR code.
4.5.1 The homepage settings ad notification
A. Battery level (Battery icon): Shows the battery
and charging status.
B. Bluetooth (Bluetooth icon): Shows if the
bluetooth is connected. If the bluetooth is
disconnected, click the icon to reconnect.
C. Connectivity (Wi-Fi icon): Shows if the device is
connected to the internet.
D. Mower status (My mower): Shows the current
status of the product.
4.5.2 Main app function settings:
● Edge cutting distance:
• Select the distance for mowing: far, moderate, or
near.
● Rain delay:
• If the rain delay function is set to on, the product
will wait for the rain to stop before it start the
operation again.
Note! It is recommended to set the rain-delay for at least
4 hours.
● Schedule:
• In the "Schedule" column, you can select the time
for the product to start the operation. If you need to
stop the scheduled operation, cancel the schedule
in the app.
24
● Notifications
• System notifications: Shows the latest news and
updates.
• Device notifications: Messages about work status
updates: for example when the operation is
completed, blade replacement, unexpected
behaviors, unsual position and other events.
• Pop-up messages: Pop-up messages are shown in
the center of the screen. For example, if an error
has occured.
● IoT
The product is an Internet of Things (IoT). When the
product is connected to the Internet via cellular network
or your Wi-Fi network, it enables following functionalities:
• Firmware Updates Over-The-Air (OTA), keep your
product updated.
• Let the remote control start the operation, stop the
operation, go back to charging station, set mowing
schedule, set cutting height and other functions.
• Remotely monitor the mowing progress and
location of the product.
• Report error code and product status through
the network.
● Firmware update
If the product is connected to WI-FI, you will be notified in
the app when a new firmware is available for your
product.
● The product will get updated automatically when you
approved the update.
● Make sure to regularly check for firmware updates.
Caution! Do not move the product during the
update process.
5

Transport

Warning! Make sure that the product is stopped
before you lift or move it.
● During product operation, push the "STOP" button and
then the power switch to stop the product. (Figure 15)
● Lift the product by the handle to make sure that the
blades are pointed away from you. (Figure 16)
● If the product must be transported in a vehicle,
transport the product in its original packaging if
possible.
6

Storage

Caution! Fully charge the battery before storage
to prevent over-discharge and damaged to the electrical
parts.