Safety; Safety Definitions; Safety Instructions For Operation; Personal Safety Instructions - Meec Tools Rmv500M20V Bedienungsanleitung

18. Dashboard display: Shows different states and
modes:
• Idle: The product is in standby.
• Light is on: The product is in working mode.
• ---- : The rain delay setting is activated and the
product will return to the charging station.
• STOP: The emergency stop has been activated.
19. OK/ Enter button: Push the button to activate an
operation or to enter a value for example when you
register a PIN-code.
20. Home button/Decrease button: When pushed the
product returns to the charging station or to
change the value (-) when you enter the PIN-code.
21. Start button/Increase button: Push to start the
operation or change the value (+) when you enter
the PIN-code.
22. Switch button: To start and stop the product.
2

Safety

2.1

Safety definitions

Warning! If you do not obey these instructions,
there is a risk of death or injury.
CAUTION! If you do not obey these instructions,
there is a risk of damage to the product, other materials
or the adjacent area.
Note! Information that is necessary in a given situation.

2.2 Safety instructions for operation

Warning! If you do not obey these instructions,
there is a risk of death or injury.
● Read the Warning instructions that follow before you
use the product.
● The product can be used by children aged from 8
years and persons with functional disorders if they get
full instruction and can operate the product correctly.
● Do not let children, persons with functional disorders
or persons who do not sufficiently know the product to
use it. Local regulations can limit the age of the
operator.
● Do not let children play with the product.
● Do not let children clean or do maintenance to the
product.
● Do not let children be in the adjacent area or play with
the product when it operates.
● Do not put objects on the product or the charging
station.
● Do not use the product if the cover or the safety
guards are damaged or not correctly attached.
● Do not lift or move the product when it operates.
● Stop and make sure that the blades have completely
stopped before a blockage is removed.
● Stop and disconnect the product from the power
supply and make sure that the blades have completely
stopped before you examine, clean or do maintenance
to the product.
● Do not bypass the power switch.
● Do not use the product if the power switch is
damaged.
● Do not use the product if it is damaged.
● Do not make changes to the product.
● Use the product only for its specified function.
● Keep your hands and feet away from the rotating
blades. Do not put your hands or feet near or below
the product when it is set to ON.
● Stop the product when persons, especially children or
animals are in the work area.
● Do not lift the product or move it when it is set to ON.
● Do not to let the product collide with persons or
animals. If a person or animal comes in the way of the
product, stop the product immediately.
● Do not use the product if the STOP button does not
work.
● Always set the product to OFF when it is not in
operation.

2.3 Personal safety instructions

● Stay alert, watch what you are doing, and use
common sense when you operate the product.
● Do not use the product if you are tired, ill, or
intoxicated. This will decrease your vision, alertness,
coordination and judgement.
● To prevent accidental operation, make sure that the
switch is in the OFF-position before you connect the
product to the power source.
● To prevent injuries, remove all tools that are attached
to the power tool before you start the operation.
● It is important that you are balanced at all times. Make
sure that you can always control the power tool also in
conditions that occur suddenly.
EN
SV
NO
PL
DE
FI
FR
NL
19