Connections - Traxon E:cue Rdm Isolator Bedienungsanleitung

RDM Isolator — Information for Use
5

Connections

3
1 2
1 Power LED
2 Data LED
3 Data input
port
4 Data output
port
5 Power supply
selector
6 Power supply
port
| Connections
AA438860235
Indicates operational device
Indicates valid data input:
On = valid DMX/epix signal or RDM request
detected
Blinking = valid RDM response detected
Use either RJ45 (Traxon-e:cue pin assignment)
OR screw terminals.
Use either RJ45 (Traxon-e:cue pin assignment)
OR screw terminals
Biased RDM command port
Power back function on pins 5 (24 V DC) and 3
(GND)
Select „DMX" for Traxon-e:cue power back
function or „ext." for separate power supply unit.
If selected supply 9 ... 48 V DC with at least 1W.
4
5
6
6 / 16