Technical Data - Steinbach Poolrunner One Rxb 150 Kurzanleitung

OPERATION (FIGURE 2)
1.) Switch on the device. To do this, press the switch-on button for 3 seconds.
The device starts to beep.
2.) The appliance must be placed in the water within 20 seconds, otherwise
it will switch off automatically.
3.) Hold the appliance slightly tilted forwards in the water until no more air
escapes and lower it with the underside towards the bottom of the pool for
unhindered cleaning.
Please note!
structure of the floor, you can optionally remove the cleaning lips on the
appliance.
CLEANING
Clean the appliance and all components thoroughly after each use. Only use
mild bathroom cleaners, clear water and a lint-free cloth. Avoid aggressive
agents. Then dry it completely.
STORAGE
To extend the service life of the battery, fully charge the robot and switch
it off before storing it for a longer period of time. Store the device and the
components in a cool, dry and frost-free place (≥ +5 °C) out of direct sunlight.

TECHNICAL DATA

SWIMMING POOL CLEANER
Item number:
Diving depth:
Protection class:
ACCU
Battery type:
Battery capacity:
Loading time:
*Running time (up to):
CHARGER
Rated power:
Operating voltage and frequency:
Output voltage:
Protection class:
POOL
Pool size - floor area:
Salt content of water (salt electrolysis): < 0,5 %
Water temperature:
Ambient/storage temperature:
*Please note!
Depending on the conditions on site, such as the
type and quantity of dirt accumulated or surface
061503Y
2,0 m
IPX8
Lithium-ion
5.200 mAh
5 h - 6 h
110 min
30 W
100-240V~ / 50-60Hz
12,6 V
IP20
15 m
5°C - 35°C
5°C - 40°C
The running time is influenced by various
parameters such as the pool water temperature.
2