Werbung
5.Cleaning of Laser Module
The laser module and the X-axis dual-axis core need to be regularly cleaned.
After using the laser module for a certain period, some residues may be left on the protective cover, heatsink, and laser head. These
residues should be cleaned in a timely manner to avoid affecting the use of the laser module.
a. The cleaning time is about 8 hours after the laser module is in operation.
b. The windshield and protective cover must be removed before cleaning.
c. It is recommended to use alcohol for cleaning and wiping.
Remove the protective cover, air
guide cover, nozzle, and window
mirror.
6. FAQ
1.The auxiliary positioning function is turned on, but the working area does not meet the claimed value.
Solution: This is a normal phenomenon.
Clean with alcohol and a
lint-free cloth.
25
alcohol
a lint-free cloth
Werbung
