OHAUS i-D61PW5K1S6 Bedienungsanleitung Seite 43

Defender 6000 Indicators
• The Stability field is 1 character. A space is printed if the weight value is stable. A '?' is printed if the weight
value is not stable.
• The G/N field is 1 character. 'G' is printed for a gross weight. 'N' is printed for a net weight.
• The Message field is 5 left justified characters.
Note: The Termination Characters Carriage Return and Line Feed are appended to the printout.
4.7.4 RS485 Configuration
Please refer to RS485 Configuration in the Defender
4.7.5 Ethernet Configuration
Please refer to Configuration in the Defender
4.7.6 Analog Configuration
Please refer to Analog Configuration in the Defender
4.8 Memory
The Memory menu is different for i-DT61PW and i-DT61XWE. Please check the following sections for details.
4.8.1
Memory menu (for
StatUs
[
Status
To enable or disable the memory function.
OFF
ON
EHPort
[
Export
To export weighing data.
NO
Yes
dELEtE
[
Delete
To delete weighing data.
NO
Yes
4.8.2 USB memory (for
USB memory is used to store the weight readings for future reference. By connecting a USB flash drive to the
scale the weight readings can now be stored directly on the USB flash drive.
Note: this menu is only visible after a USB flash drive is detected.
The data will be stored in the flash drive in the following location:
\SYSTEM\DATA
A new file will be created monthly (one txt file stores a whole month's output data...). The name of the txt file
will be year plus month.TXT. For example, the name of the txt file for 2020.6 will be 202006.TXT.
To enable USB memory:
1. After you insert a USB flash drive, long press the Menu button until you see
2. Short press the No button several times to navigate until you see
3. Short press the No button to navigate until you see
4. The display flashes with
5. Sub-menu Link to (
6. Then the sub-menu appears with selections of RS232 (
EtHNEt
(
7. The display shows
exit.
Find Quality Products Online at:
i-DT61PW model)
]
= to disable memory function.
= to enable memory function. Press the Print button to save weighing data.
]
= to export weighing data function is disabled.
= to export weighing data function is enabled.
]
= to not delete weighing data
= to delete weighing data
i-DT61XWE model)
ON
. Press the Yes button to enable.
LINK
) appears. Press the Yes button to enable.
.
) Choose the one you want and press the Yes button.
END
. Press the Yes button. The display shows the next menu. Press the Exit button to
GlobalTestSupply
www.

6000 RS232/RS485/USB Interface Instruction Manual.

6000 Ethernet Interface Instruction Manual.

6000 Analog Kit Instruction Manual.
mM.e.mM.O
USb
. Press the Yes button.
rS232
), 2nd Serial (
C.A.L
.
. Press the Yes button.
2.SErIA
) and Ethernet
.com
sales@GlobalTestSupply.com
EN-41