• Clean the cutting device regularly with a brush or
a cloth.
• Never clean the cutting device with water
• Danger of corrosion!
• Clean and oil all moving parts regularly.
• Never use grease!
• Use environmentally friendly oil.
Maintenance plan
Activity - Maintenance interval
Adjusting the cutting device - as required
Adjusting the idle speed - as required
Tightening the silencer screws - as required
Cleaning / replacing the fuel filter - as required
Cleaning / replacing the air filter, every 8 operating
hours (more often in dusty conditions)
Lubricating the transmission, every 20 operating
hours, at least once a year
Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Cutting blade, spark plug, air filter,
fuel filter
* may not be included in the scope of supply!
Spare parts and accessories can be obtained from
our service centre. To do this, scan the QR code on
the cover page.
11. Storage and transport
Storage
Store unused devices with the blade guard pushed
on in a dry, locked place and out of reach of children.
Before long-term storage, observe the following in
order to increase the service life of the hedge trim-
mer and ensure smooth operation:
• Carry out a thorough cleaning.
• Treat all moving parts with environmentally friendly
oil.
• Do not use grease.
• Slide the blade guard onto the cutting device.
• Remove the spark plug connector.
• Empty the fuel tank completely.
• Dispose of the remaining fuel properly (environ-
mentally friendly).
• Run the carburettor empty.
Transport
To transport the device, switch the motor off, wait
until the cutting device has come to a standstill and
attach the blade guard.
30 | GB
Carry the device by the front handle. Hold the cutting
device backwards and keep the hot silencer away
from your body.
Only transport the device in the boot of the car or a
separate transport surface.
Secure the hedge trimmer against tipping, damage
and from fuel leaking.
12. Disposal and recycling
Notes for packaging
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
electrical devices.
Fuels and oils
• Before disposing of the unit, the fuel tank and the
engine oil tank must be emptied!
• Fuel and motor oil do not belong in household
waste or drains, but must be collected or disposed
of separately!
• Empty oil and fuel tanks must be disposed of in an
environmentally friendly manner.
www.scheppach.com
The packaging materials are recy-
clable. Please dispose of packaging
in an environmentally friendly man-
ner.