Zendure SolarFlow 800 Bedienungsanleitung Seite 6

EN
4. Important Tips
√
√
Grid-tied Regulation: The PV system is grid-tied. Please check if it is allowed in your area.
√
√
√
Protect from Direct Sunlight: Ensure the SolarFlow 800 is placed in a shaded area to avoid rapid
temperature increases that could affect performance.
Accessory Check: Verify the necessary accessories before installation, as some may need to be
purchased separately.
€
Download the Zendure App: After installation, download the Zendure app to unlock additional
smart features and remote control options.
Grid Connection Time: Once installation and the initial startup are complete, it requires
approximately 1 minute for the SolarFlow 800 to connect to the grid.
Set Safe AC Output: Use the Zendure app to configure the AC output for home use. Ensure the
output complies with your country or region's safety power limits to prevent overloads.
Shutdown Procedure: Before removing the SolarFlow 800, press and hold the button on the
SolarFlow 800 Hybrid inverter for 6 seconds to turn off the device, and disconnect all power
cables for safety.
Optimal Operating Conditions: It is recommended to use this product in environments ranging from 15℃ to 30℃ ,
away from water, heat sources, or sharp objects that could cause damage.
No Disassembly: Do not attempt to disassemble the product. For repairs or servicing, consult official Zendure
channels. Improper handling could pose risks of fire or personal injury.
5. What's in the Box
SolarFlow 800 Hybrid Inverter
Mounting Screw Kits*2
Plastic Anchors *2
User Manual
Wrench for Removing Solar
Connector and AC Connector
5
3m 10A AC Power Cable
Antenna