Zendure SolarFlow 800 Bedienungsanleitung Seite 24

EN
5. Safety Settings: Set the maximum output power and maximum input
power allowed by the system to ensure that the system operates at a safe
value. After completion, click "Next Step" to enter the next interface.
6. Base Load Settings: The charging and discharging power plan from 0: 00 to 24: 00. If the user does not
set it, it will be a constant power output of 200W. When the system does not have a Smart Meter or Smart
Appliances, it will input and output according to the power set by the basic load.
As shown in the figure, it is set to charge 200W from the grid from 08: 00 to 15: 00.If the system is not bound
to a Smart Meter or Smart Appliances, the system will maintain a discharge action of 200W during the time
period from 00: 00 to 08: 00, maintain a charge action of 200W during the time period from 08: 00 to 15: 00,
and maintain a discharge action of 200W during the time period from 15: 00 to 24: 00.
23