Zendure SolarFlow 800 Bedienungsanleitung Seite 4

EN
2. Safety Instruction
2.1 Usage Guide
1.Please carefully read all current documentation before installing, using, or servicing the product, as documentation
may be updated over time.
2.Please check whether the product is damaged, cracked, leaking liquids, becoming hot, or exhibiting other
abnormalities, and check any cables for damage before operating. If there are any problems, please stop using the
product immediately and contact our customer service.
3.Do not place heavy objects on top of the product.
4.Make sure all cords and plugs are intact and dry before connecting to avoid electric shock.
5.Do not install or operate the system under extreme climatic conditions such as lightning, snow, heavy rain, strong
winds, etc.
6.To reduce the risk of injury, close supervision is necessary when the product is used near children.
7.Keep hands and fingers away from the product's internal components.
8.For safety purposes, please use only the original charger and cables designed for the equipment. We are not liable for
damage caused by third-party equipment, and this may render your warranty invalid.
9.Maintain a minimum clearance of 50mm between the product and any surrounding objects.
10.During the operation of the solar energy system, avoid direct sunlight to prevent the product from overheating. Do
not place the product near any heat source.
11.Please install the product according to our user manual to avoid damage to the product or injury to other people.
12.Do not use this product near strong static electricity or strong magnetic fields.
13.Do not place the equipment in an environment with flammable or explosive compounds, gas, or smoke. Since the
product relies on the shell to dissipate heat, exposing the enclosure to excessive heat will lead to damage.
14.To reduce the risk of damage to the electric cords and connectors, pull the connectors rather than the cord when
disconnecting the product.
15.Do not use the product in excess of its output rating. Overloads may result in a risk of fire or injury to persons.
16.Do not use any products or accessories that are damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior, resulting in fire, explosion, or risk of injury.
17.Do not operate the product with a damaged cord or plug, or a damaged output cable.
18.Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or electric shock.
19.Do not expose the product to fire or high temperatures.
20.Do not attempt to replace the internal components of the equipment by any unauthorized personnel. Have servicing
performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the
product is maintained.
21.The product has a protection level of IP67, so the product cannot be immersed in liquids. If the product accidentally
falls into the water during use, please place it in a safe and open area and stay away from it until it is completely dry.
The dried product should not be used again and should be properly disposed of according to the disposal guidelines
in this manual.
22.The product may feel warm when it's working. This is a normal operating condition and should not be a cause for
concern.
23.To reduce the risk of electric shock, disconnect the solar photovoltaic panels, batteries, and home grid before
attempting any instructed servicing.
24.When charging the battery, work in a well-ventilated area and do not restrict ventilation in any way, as inadequate
ventilation may cause permanent damage to the equipment.
25.Do not clean the product with harmful chemicals or detergents. Only clean it with a dry cloth.
26.Do not move or shake the unit while operating, as vibrations and sudden impacts may lead to poor connections to
the hardware inside.
27.Ensure that the product and the batteries are installed securely to avoid accidents and product damage caused by
falling.
28.In case of a fire, only a dry powder fire extinguisher is suitable for this product.
29.Servicing of batteries should be performed or supervised by personnel knowledgeable about batteries and the
required precautions.
3