Zendure SolarFlow 800 Bedienungsanleitung Seite 14

EN
Product Placement and Cable Management
• Move the Hyper 800 near their final installation site.
• The SolarFlow 800 should be positioned such that the solar and AC cables can run straight down without
significant bending.
7.3.2 Connect to the Add-on Batteries
Remove the silicone protective cover from the battery terminal on SolarFlow 800 and Add-on batteries(not included).
Connect Add-on Batteries to SolarFlow 800 with the battery cable, The terminals of the battery cable can be self-
locking, when you hear a click, you have inserted the battery cable well.
13
The arrow on the battery
cable is in the front.
The arrow on the battery
connector and the "note"
on the top of the AB1000
are on one side.