Fritz! Smart Control 350 Installation Und Betrieb Seite 26

Configure
You can configure FRITZ!Smart Control 350 in the FRITZ!Box user interface. For more
information, see .
For Sockets and LED Lights
1. Open a web browser and enter http://fritz.box.
The FRITZ!Box user interface will open.
2. Open the Smart Home > Devices and Groups menu.
3. Click on behind your FRITZ!Smart Control 350.
Configure FRITZ!Smart Control 350 on the FRITZ!Smart Control 350 tab.
For Radiator Controls
1. Open a web browser and enter http://fritz.box.
The FRITZ!Box user interface will open.
2. Open the Smart Home > Devices and Groups menu.
3. Click on behind your FRITZ!Smart Control 350.
4. Select the desired radiator control under Open window detection for radiator control.
FRITZ!Smart Control 350 is set up as an external sensor for the radiator control. The
radiator control interrupts heating as long as the window is open:
When Open window detection for radiator control is enabled, you can still
configure FRITZ!Smart Control 350 to switch additional smart home devices.
26