Fritz! Smart Control 350 Installation Und Betrieb Seite 25

Installation on the Window/Door Frame
Use the yellow adhesive strips for a test installation and the white adhesive strips
to attach the FRITZ!Smart Control 350. Stick the adhesive strips to the back of the
sensor and magnet.
1. Close the window completely and attach
the sensor on the window frame above
the window handle with the positioning
mark facing upwards.
2. Transfer the position of the sensor to the
window sash.
3. Attach the magnet to your marking on
the edge of the window sash so that the
positioning marks are aligned with each
other.
FRITZ!Smart Control 350 is mounted and
can be configured.
25