Fritz! Smart Control 350 Installation Und Betrieb Seite 23

Installation Tips
Please note the following tips when installing FRITZ!Smart Control 350.
in the frame
• FRITZ!Smart Control 350 can not
be installed in windows made of
aluminium or iron.
• FRITZ!Smart Control 350 can be
installed in windows with EuroFold.
• Check whether FRITZ!Smart Con-
trol 350 fits in your window frame.
• Test the installation and functionality
before final installation using the
removable yellow adhesive strips.
on the frame
• FRITZ!Smart Control 350 can be in-
stalled on windows and doors made of
aluminium or iron.
• Test the installation and functionality
before final installation using the re-
movable yellow adhesive strips.
During installation, make sure that the
positioning marks are aligned with each
other and comply with the recommended
spacing.
• For windows and doors to be detected
as closed, the positioning marks on
closed windows and doors must be no
more than 40 mm apart.
• For windows and doors to be detect-
ed as open, the positioning marks on
opened windows and doors must be at
least 90 mm apart.
23