Beyerdynamic DT 70 IE Bedienungsanleitung Seite 5

REPLACING EARTIPS
If you are using them regularly, we recommend
�
changing the eartips every three months.
� Replacement silicone eartips can be ordered from
the beyerdynamic replacement parts shop:
https://www .beyerdynamic .com/service/replace-
ment-parts
Replacement Comply™ foam eartips, together with
�
dealers where you can order the eartips, can be
found at: www.complyfoam.com
Eartip types used: Tx-500
Carefully remove the
1
eartip from the earphone.
Dirty sound outlets can
2
be cleaned by replacing
the small earwax guard
grilles.
Use a lint-free cleaning
�
cloth to clean the ear-
phone's sound outlet
from residues.
Make sure that no liquid
�
flows into the outlet.
Attach the earwax
3
guard grille to the
earphone.
Attach the eartip
4
to the earphone.
DT 70 IE
1
2
3
4
| DT 71 IE | DT 72 IE | DT 73 IE
ATTACHING AND CHANGING THE CABLE
The earphones have plug-in cables on the housings
with standard MMCX connectors with locking
mechanisms.
When detaching or attaching the cable, always hold
the cable by the connector to avoid damaging the
cable or earphone. Do not pull directly on the cable!
Otherwise the cable or the earphone may be damaged.
� Detach the cable
from the housing.
Attach the cable.
�
INSERTING AND WEARING THE EARPHONES
Due to the anatomical shape of the earphone housing,
the cable of the earphone is routed behind the ear. This
way of wearing the earphone effectively suppresses
cable noise, and the earphone sits firmly in the ear even
when the cable is pulled.
Bend the ear hooks to
1
fit around your ears.
Insert the earphones
so that they ensure a
proper seal. A good
fit has a major effect
on the sound quality.
Important: If the bass
2
is weak, the eartips are
not sealing properly.
Insert the earphone
deeper or use another
size of the eartips to
achieve a better fit.
5
1
2