IKEA GRÄNSLÖS Bedienungsanleitung Seite 15

ENGLISH
Caution! Only use the core
temperature sensor supplied with
the appliance, or genuine
replacement parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the top of the
cavity.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default core
temperature is 60 °C. While
you can use the knob for the
temperature to change the default core
temperature.
The display shows the symbol of the core
temperature sensor
core temperature.
4. Press to save the new core
temperature, or wait 10 seconds for the
setting to be saved automatically.
flashes,
and the default
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the meat is at the set core
temperature, the symbol for the core
temperature sensor
core temperature flash. An acoustic signal
sounds for two minutes. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the appliance.
Warning! Be careful when you
remove the tip and plug of the
core temperature sensor. The
core temperature sensor is hot.
There is a risk of burns.
The Duration
not operate with the core
temperature sensor.
You can change the core temperature at
any time during the cooking:
1. Press :
• four times - the display shows the set
core temperature which changes
every 10 seconds to the current core
temperature.
• five times - the display shows the
current oven temperature which
changes every 10 seconds to the set
oven temperature.
• six times - the display shows the set
oven temperature.
2. Use the knob for the temperature to
change the temperature.
Using the telescopic runners
Keep the installation instructions
for the telescopic runners for
future use.
15
and the default
and End do