VEVOR TEJ5075BCTN Bedienungsanleitung Seite 10

1. Occasional cleaning with mild soap and water along with light oil
lubrication of pivot points will prolong peak performance and
appearance.
2. Periodically check whether the screws are loose.
3. Before each use, inspect jack tubes and replace them if bent or
damaged.
4. If wiring is connected to battery terminal, inspect at least twice each
year for corrosion. Clean with a solution of baking soda and water,
and then apply a thin coat of grease.
5. Maintain the product by adopting a program of conscientious repair
and maintenance in accordance with the following recommended
procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep
handles dry, clean, and free from oil and grease. The following chart is
based on a normal operation schedule.
Maintenance Interval
Daily before operating
MAINTENANCE
1.The powered A-frame jack motor is sealed and
maintenance-free.
2.Before each use, inspect jack tubes and replace
them if bent or damaged.
3.Ensure all connections are tight and free of
corrosion and that the jack is properly ground with the
coupler (metal-to-metal contact).
4.If necessary, wash with mild soap and water and
rinse thoroughly. The motor ground screw and
mounting bolts must also be cleaned if a ground
continuity problem occurs.
- 9 -
Maintenance Point