Herunterladen Diese Seite drucken

Checking The Charge Status Of The Battery; General Working Instructions; Using The Device As Grass Shears/Shrub Shears; Cleaning/Maintenance - Parkside Pags 20-Li A1 Originalbetriebsanleitung

Akku-gras- und strauchschere
Vorschau ausblenden Andere Handbücher für PAGS 20-Li A1:
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
After switching the unit off,
the blades take a short time
to stop moving. Let the blades
come to a complete standstill.
Do not touch the blades or slow
them down before the moving
parts have come to a standstill.
­ Checking­the­charge­
status of the battery
The battery charge level indicator (14) on
the battery (13) shows the charge level.
Press the button (15) for the charge level
indicator on the device. The charge level
of the battery is indicated by illumination
of the corresponding LED light.
3 LEDs are on (red, yellow, green):
Battery charged
2 LEDs are on (red, yellow):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged
General­working­
instructions
•­ Check­the­device­before­each­use­for­
obvious defects such as loose, worn or
damaged parts.
•­ Comply­with­the­device's­maintenance­
and cleaning instructions.
Using­the­device­as­grass­
shears/shrub shears
Ensure objects such as wire, metal-
lic parts, stones etc. do not enter
the blades while trimming. This can
cause damage to the cutting unit.
If the blades become jammed with
solid objects, turn the device off
immediately.
•­ Ensure­that­the­screws­in­the­blade­bar­
are­firmly­in­place.­
•­ Only­use­sharp­blades­to­ensure­good­
trimming performance and to protect
the device and rechargeable battery.
•­ Do­not­overload­the­device­while­wor-
king to such an extent that it comes to
a standstill.
Working using the grass shears
•­ Grass­is­best­cut­when­it­is­dry­and­not­
too high.
Working using the shrub shears
•­ Move­the­device­in­a­steady­forward­
motion, or up and down in an arch-sha-
ped motion.
•­ The­double-sided­blade­bar­enables­trim-
ming in both directions, or via pendulum
movements from one side to the other.

Cleaning/Maintenance

Leave any work not covered
in this manual to our Service
Centre. Only use original
parts. There is a risk of injury!
Remove the battery before all
maintenance work. There is a
risk of injury.
Never use cleaning agents or sol-
vents, which can cause irreparable
damage to the unit. Chemicals can
attack the plastic components on
the unit.
GB
31
loading

Diese Anleitung auch für:

434669 2304