COMTRAXX® COM465IP/COM465DP
COMTRAXX® COM465...P
Condition Monitor mit integriertem Gateway für die Ver-
bindung von Bender-Geräten mit PROFIBUS DP und
Ethernet-TCP/IP-Netzwerken.
Diese Kurzanleitung ersetzt nicht das Handbuch!
Kurzanleitung für folgende Geräte
Typ/Type
COM465DP-230V
COM465IP-230V
Lieferumfang
• COM465xP
• Sicherheitshinweise
• Kurzanleitung
Bestimmungsgemäße Verwendung
Das COM465...P verbindet Bender-Geräte mit
• BMS-Bus oder BCOM-Schnittstelle
• Modbus RTU oder Modbus TCP
mit Ethernet-TCP/IP- und PROFIBUS-DP-Netzwerken
(nur COM465DP).
Ein COM465...P setzt Alarme, Messwerte und Zustände
der Geräte auf die Protokolle Modbus TCP, SNMP sowie
HTTP um. Dies ermöglicht die Ankopplung an Modbus-
TCP-Netzwerke sowie die Visualisierung und Auswer-
tung mit Standard-Web-Browsern. Die Bedienung und
Einstellung erfolgt über die im Gerät integrierte Web-
Bedienoberfläche.
Eine andere oder darüber hinausgehende Benutzung
gilt als nicht bestimmungsgemäß.
Montage und Anschluss
I
g
! Lebensgefahr durch Stromschlag!
efahr
Bei Berühren von unter Spannung stehender
Anlagenteile besteht die Gefahr eines elektri-
schen Schlages. Stellen Sie vor Einbau des
Gerätes und vor Arbeiten an den Anschlüssen des
Gerätes sicher, dass die Anlage spannungsfrei ist.
Beachten Sie die Regeln für das Arbeiten an elekt-
rischen Anlagen.
I
g
! Lebens- und Zerstörungsgefahr
efahr
durch Nässe!
Gerät so installieren, dass es vor Feuchtigkeit ge-
schützt ist.
2
COM465xP_D00216_04_Q_DEEN/03.2025
Anwendung / Application
Bender-System /PROFIBUS DP / Ethernet
Bender-System / Ethernet
Handbuch
COMTRAXX® COM465...P
Condition Monitor with integrated Gateway for the con-
nection of Bender devices to PROFIBUS DP and Ether-
net-TCP/IP networks
This quick-start guide does not replace the manual!
Quick-start guide for the following devices
Art-Nr. / Art.-No.
B95061060
B95061065
Scope of delivery
• COM465xP
• Safety instructions
• Quickstart
Intended use
The COM465...P connects devices with
• BMS Bus oder BCOM Interface
• Modbus RTU or Modbus TCP
to Ethernet TCP/IP and PROFIBUS DP networks (COM465DP
only).
A COM465...P converts alarms, measured values and
states of the devices into Modbus TCP, SNMP and HTTP
protocols. This conversion enables coupling to Modbus
TCP networks as well as data display and evaluation
using standard web browsers. It is operated and config-
ured using the web user interface integrated into the
device.
Any use other than that described in this quickstart is
regarded as improper.
Mounting and wiring
I
D
! Danger to life due to electric shock!
anger
There is a risk of electric shock if live parts of the
system are touched. Before installing the unit
and working on the unit's connections, make
sure that the system is de-energised. Observe the
rules for working on electrical systems.
I
M
danger and risk of irreparable damage
ortal
due to moisture!
Install device such that it is protected against
moisture.
Handbuch / Manual
D00216
Manual