Werbung
5.2
Mounting using adhesive strips
5.3
Technical data
Type
RLDS 61071-N6
Dimension
86 × 58 × 20,6 mm
Weight
183 g
Ambient temperature
0 ... 50 °C
Ambient humidity
5 ... 80 %, not condensing
Storage temperature
-10 ... 50 °C
The maximum possible radio range within buildings depends on the individual environmental factors on site.
The actual radio range may differ greatly from the free-field radio range.
6 Display elements
*
only Alpha Smartware Premium
**
The symbol is NOT displayed if the Base
Station is in heating/cooling mode AND the
heating/cooling blocking parameter is set
on the room control unit
Depending on the surface, installation can be performed with double-sided adhe-
sive tape. Installation is possible on different surfaces as e. g. masonry, furniture,
tiles, or glass.
In case of installation with adhesive strips the installation surface must be
even, smooth, undamaged, clean, and free from grease and solvents. Use
suitable adhesive strips.
1. Select a suitable mounting position
2. Remove the protective film from one side of the adhesive strip
3. Attach the adhesive strip to the back of the mounting base
4. Remove the protective film from the other side of the adhesive strip
5. Align the device horizontally in the desired position and press firmly
Operating voltage
Battery type
Radio frequency
Typical. free-field radio range
Max. Radiated power
Protection type
Parameterisation active*
Heating mode** active
Cooling mode* **
lights up: active
flashes (slowly): Dew active
Important note/
Malfunction
Low battery
Radio connection status
Constantly on: active
Flashing: Signal disturbed (< 180 min)
Radio connection status
Flashing: Signal disturbed (≥ 180 min)
Display elements
3 V d.c.
2× 1,5 V LR06/AA (Mignon) Alkaline
868,3 und 869,525 MHz SRD-band
270 m
≤ 25 mW
IP 20
Temperature
Relative humidity
Temperature limit
Maximum temperature*
Temperature limit
Minimum temperature*
Vacation mode active
Settings only via Alpha Smart
app
Manual mode
possible without cloud connec-
tion, standalone operation
Automatic mode
Creation of heating and cooling
profiles* only via Alpha Smart app
DE
EN
FR
NL
IT
ES
DA
NO
FI
SV
PL
EL
TR
11
Werbung
