FLARM PowerFLARM Flex Kurzanleitung Seite 8

3. Operation
Startup Sequence
1. Press and hold the rotary switch. The
device starts up after about 2 seconds.
2. Ensure that no error or warning messages
appear on the display.
Configuration
Essential configuration via the display:
▶ Press and hold the rotary switch for two
seconds to enter menu and configure the
essential settings.
Full configuration via FLARM Hub App:
▶ Select "Hub" from the Flex menu
▶ Install and run the FLARM Hub App
(iOS/Android).
▶ Select "Add", then "Scan QR code". Scan
the QR code display on the Flex display.
▶ Configure Flex using the App.
Android
8
iOS
Usage
After startup, the device automatically enters
the Traffic View screen.
• Rotate the rotary switch to adjust the
zoom level.
• Short press the rotary switch to switch to
Detailed View.
• Long press (2 seconds) to open the Menu.
• Double press to register a Pilot Event.
In Detailed View:
• Rotate the rotary switch to cycle through
visible aircraft and view detailed informa-
tion for each.
• Short press returns to Traffic View.
• Long press opens the Menu.
In the Menu:
• Rotate the rotary switch to navigate
between menu items.
• Short press to enter a menu or submenu.
• Rotate to change a setting.
• Short press again to confirm.
• To exit and return to Traffic View, select
"back" and press the rotary switch.
Understanding Alerts
To familiarize yourself with alert behaviors,
run the Alarm Simulator in the settings menu
(via the App or Display).