Soldering - Parkside Plsa 20 Li B2 Bedienungs- Und Sicherheitshinweise

˜ Soldering
m CAUTION!
Vapours can lead to headaches and fatigue if inhaled .
NOTE
The product is suitable for hard-to-reach areas and fine
u
soldering work .
1 . Clean the soldering tip
2 . The soldering tip
solder to tin the hot soldering tip .
[ 12 ]
3 . Direct the soldering tip
soldering tip .
4 . Place the solder
tip to melt .
[ 11 ]
5 . Keep feeding solder
6 . Withdraw the soldering tip
solder from overheating .
7 . Allow the solder to harden . Avoid any knocks or vibrations .
NOTE
The flux is either included in the solder or applied separately .
u
When you buy the solder, ask about the kind of applications it
is suitable for and the appropriate flux .
18 GB
on the wet soldering sponge
[ 11 ]
must be tinned after cleaning . Melt some
11 ] [
to the soldering location and heat the
[ 11 ]
between the soldering location and soldering
12 ] [
until the entire solder joint is covered .
[ 12 ]
immediately to prevent the molten
11 ] [
.
2 ] [