Residual Risks - Parkside Plsa 20 Li B2 Bedienungs- Und Sicherheitshinweise

Customers from HU (Hungary), CZ (Czech
Rep .) & SK (Slovakia) can obtain compatible
replacement batteries and chargers from the
LIDL online shop www .lidl .de . Customers from
SI (Slovenia) via www .optimex-shop .com .
˜ Residual risks
m CAUTION! RISK OF BURNS! Do not touch the heated
soldering tip or the molten solder . There is a risk of being burnt .
Always allow the product to cool down completely before
changing, cleaning or checking components .
After work, allow the soldering iron to cool down in the air only .
Do not attempt to quench it with water!
m CAUTION! RISK OF FIRE! Always use the special holder or
another fireproof surface when you put the soldering iron down .
During breaks from work, the soldering iron must be placed into
the holder .
Keep the product away from flammable material .
Never leave a switched-on product unsupervised .
CAUTION! RISK OF INJURY! Keep your hands away from
m
the heated workpiece . The heat can be emitted through the
workpiece .
Avoid contact between the hot soldering tip and the plastic parts
of the holder . Otherwise, the product might be damaged .
In case of hazards, remove the battery pack from the product
immediately .
m CAUTION! RISK OF POISONING! Do not breathe in
vapours .
14 GB