Assembling The Holder; Changing The Soldering Tip - Parkside Plsa 20 Li B2 Bedienungs- Und Sicherheitshinweise

During work over an extended period in which hazardous
vapours can be created, always ensure sufficient ventilation of the
workplace . In addition, protective gloves, a face mask and work
apron are recommended .
Avoid eating, drinking and smoking in rooms where soldering
work is taking place . Otherwise, lead residues on your hands
might contaminate the food, drink or cigarettes and be absorbed
into your body .
Always wash your hands thoroughly after soldering .
Do not dispose of solder waste in normal household waste! Solder
waste should be disposed of with hazardous waste .
The product is suitable for indoor use only .
Have the product repaired by the Lidl customer service centre or
a qualified electrician, using only genuine replacement parts . This
will ensure that the safety of the product is maintained .
˜ Before use
˜ Assembling the holder
Assemble the holder
o
˜ Changing the soldering tip
m CAUTION! Risk of burns!
Never heat the soldering iron
u
Switch off the product and let the soldering tip
u
before you remove the soldering tip .
1 . Loosen and remove the retaining nut
2 . Pull the fixing sleeve
on the soldering station (Fig . D) .
3 ] [
without a soldering tip
1 ] [
9 ] [
off the soldering iron
10 ] [
cool down
11 ] [
.
.
1 ] [
.
11 ] [
GB 15