AL-KO 3.25 Li easy Betriebsanleitung Seite 37

Product description
2.3 Residual risks
Even during correct use of the appliance, there is
always a certain residual risk that cannot be ex-
cluded. Depending on the use, the following po-
tential risks can be derived from the type and
construction of the appliance:
■
Throwing out of cuttings, soil and small stones.
■
Inhalation of cuttings particles if no breathing
protection is worn.
■
Lacerations from reaching into the rotating
cutting blade.
2.4 Safety and protective devices
WARNING! Risk of injury. Defective and
disabled safety and protective devices can result
in serious injury.
■
Have any defective safety and protective de-
vices repaired.
■
Never disable safety and protective devices.
Safety handle/operator presence control
The appliance is fitted with a safety handle/oper-
ator presence control. In an emergency, simply
release the safety handle/operator presence con-
trol. The motor and mower mechanism are
stopped.
Start button (on the handlebar)
The start button must first be pressed before the
motor can be switched on by means of the safety
handle/operator presence control.
Baffle
The baffle offers protection against e.g. material
particles and stones which can be flung out.
2.5 Symbols on the appliance
2.5.1 Safety signs
Symbol Meaning
Pay special attention when handling
this appliance!
Read the operating instructions be-
fore starting operation!
Risk of objects being thrown out!
443804_a
Symbol Meaning
Keep bystanders away!
Risk of injury! Keep your hands and
feet away from the blade system!
If not used, or before starting main-
tenance and repair work: Switch off
the appliance and remove the bat-
tery from the appliance!
The cutting blade continues running
for a short while after the appliance
has been switched off. Only touch
the cutting blade once all parts of
the appliance have come to a stop!
Do not use the appliance in the rain
or store it in the open air!
2.5.2 Operating signs
Symbol Meaning
Procedure for starting the motor
(see chapter 6.7 "Starting and stop-
ping the mower mechanism (19,
20)*", page 45)
If not used, or before starting main-
tenance and repair work: Switch off
the appliance and remove the bat-
tery from the appliance!
2.6 Product overviews
2.6.1 Product overview (01) – easy
No. Component
1 Handle
2 Operator presence control
3 Start button
4 Central cutting height adjustment
5 Cutting blade
6 Battery compartment cover
7 Battery compartment
37