EN
Dear customer,
Thank you for purchasing an ALFRA product. Read these operation instructions closely before using your
device for the first time and keep them for later reference.
SAFETY INSTRUCTIONS
During work with this machine, improper handling and/or poor maintenance result in significant hazards which
can lead to destruction of the machine and serious accidents with considerable injuries. Observe all safety
instructions of this operation manual and contact the manufacturer if you have any questions.
!
• During drilling operations on walls and ceilings, the Metal Core Drilling Machine must be safeguarded with
the included safety belt (f). The magnetic adhesion is not maintained in case of a failure of circuit.
• The cut core will be ejected automatically by the ejector pin. Danger of accident! The ejector pin could
possibly break in case of improper use.
• Only use undamaged power cord and extension cords and regularly check on damages!
• Power supply and voltage details at the device must correspond.
• Personal protection equipment
• When working with this device, wear the following protection equipment:
Safety goggles, appropriate footwear, ear protection, hair net (for long hair),
possibly also apron and safety helmet.
• The place of installation for the magnet foot must be clean and rustfree. Remove lacquer- and filler.
• For non-magnetizable materials, please use the ROTABEST Vacubest (Prod.-No. 18150).
• Do not execute any electric welding on the workpiece, on which the Metal Core Drilling Machine is
used.
• Prior to all operations, mount coolant unit (b).
• For operations on walls and ceilings, we recommend cooling with our spray
(ALFRA BIO 2000, Prod.- No. 21010).
Danger of injuries! Danger of an electric shock
People with cardiac pacemakers or other medical appliances may only use this machine following
approval by their physician.
Never touch rotating parts! Keep hands and fingers away from the work area while the
motor is running! Failure to do so can result in severe injuries!
1
1