Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ACCESSING
TEMPERATURE
AND
HUMIDITY
From the Main Cnit: Press [ A] or
until the IN icon on the upper right of the display
starts flashing
VIEWING
TEMPERATURE
AND
HUMIDITY
For Static Display:
In Temperature and Humidity Mode, each press of I CHANNEL
different
channels.
For Cycling Display:
To enable automatic rotating between different channel displays, press and hold [ CHANNEL
until the
icon is displayed, Each valid channel will now be alternately displayed for 5K,
ROTATING
BETWEEN
TEMPERATURE
Each press of I SET ] rotates temperature display between:
Temperature anclRelative Humidity
•
Dew
and R
Hunmidity
SETTING
UNITS FOR TEMPERATURE
Pressand hold I SET I to convert units between degreesCelsius
ACTIVATING/I)EACTIVATING
TIW
1. In Temperature and Humidity Mode, eachpressof [ ALARM/C.HART Jrotates channel
temperaturedisplay between:
•
Temperature for corresponding Channel
• Upper TemperatureAlerl (displays OFF if deactivated)a icon displayed
• Lowcr TemperatureAlert (displays OFF if
2_ When the above ålerts are displayed, Pressing [
corresponding alert,
SETTING
UP
THE
TEMPERATURE
ALERTS
L In Temperature and Humidity Mode, press [ ALARM/CHART
wish to
2. Press and hold I ALARWCHART
I until channel temperature. and [
flashing in thc display.
3. Set Value for Temperature Alert:
] or I V I to adjust value. press
PressI ALARM/CHART
to confirnt your selection.
4. Upon completion thc di»lay
will hc rcturncd tc thc temperaturc alcrt selection scrccn.
MODE
DISPLAY
FOR
EACH
CHANNEL
J rotates display between
AND
DEW
POINT
DISPLAY
DISPLAY
CC OR OF)
and degreesFahrenheit
TEMPERATURE
ALERTS
displayed
[ VI will activate/deactivate the
I to select alarm which you
or [Y]
hold either button for fust advance,
60
DISABLING
WHEN
TO Disable
Press
VIEWING
THE
MAXA,IIN
press Of [ MEMORY
•
Current temperature and humidity at remote sensor
•
Minimum
temperature and humidity at remote sensor
•
Maximum tempexature and humidity at remote sensor
RESETTING
THE MAXIMIN
Press and hold [ MEMORY
REMOTE
SENSOR
The wave icon above the current channel display shows the connection status of the
corrcsponding rcmotc sensor:
I(t0N
STATUS
Searching for remote sensor signals
Corresponding remote sensor successftllly linked
No signals received for raore than 15minutes
ACTIVATING
MAIN
The main console unit may be manually activated to search for signals from all remote sensors.
Press and hold I
I ta enforce a search.
icon starts
TEMPERATURE
ALARMS
ARE ACTIVATED
] to disable the
CHANNEL
TEMPERATURE
AND
] rotates
temperature and humidity display between:
CHANNEL
TEMPERATURE
AND HUMIDITY
I to clear memory for all channels-
STATES
CONSOLE
UNIT
TO
SEARCH
FOR
ALL
61
HUMIDITY
MEMORY
REMOTE
SENSOR
SIGNALS
Werbung
