Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Local measuring values
indoor and outdoor sensors
2.1 Display
2.2 Buttons
2.3 Navigating between different modes
2.31
Pressure
mode
2.32 Temperature and humidity mode
2.33
Rain
mode
2.34
Wind
mode
2.4 Setting and
parameters
2.4.1 Pressure parameters and moon pha
2.4.2Temperature and humidity parameters
2.4.3 Rain parameters
2.44 Wind parameters
3. LED backlight
4. Linking
the weather station to a computer
5. Maintenance
6. Technical specifications
40
A: Setting up
1. Setting up the remote weather sensors
Befor
up the main console unit, setup all the remote seawrs first.
plac:gg the sensors,make
that they ate within receiving range ofthe console unit.
(thermo-hygro
range up to LOO m in free field, rain and wind sensor:up to 30 m in free
field). Ideally they shauld be within the tine of 3ight ofthe cong•ole tmit. Transmssion range
may be affected by trees,metal sttuctures and electromc appliances-Testreception befote
petmanently mounting your weather station.
Also
make
sure that the
are
easily accessiblefor clean:ng and maintenance.
The temote
should be cleaned on a weekly East*
dilt and debris will a±ct sensor
Ilardware
Components
Fittings
"Ilmermc—Hygro S ensor
Rain Sensor:
4 screws
for
• Funnel shapedLid with
securing unit to
Battey Hatch
•
Sensor
Base
•
Bucket
Mechanism
Protective
Screen
Anemometer (Wind Sensor):
4 screws
for
Wind cup
securing unit to
•
Wind
Vane
vertical
surface
•
Anemometer
arm
Anemometer
Computer Software
2m
41
cable
Werbung
