Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RAIN
MODE
Precipitation amount for last hour, last 24 hour, yesterday,last week and last month
2.3.4
WIND
MODE
Wind
Chill
Temperature atplace
•
Wind
direction
• Wind speed
•
Wind
• Alert for wind speed and wind gust speed
¯138t
2.4 SETTING
PARAMETERS
CUSTOMIZING
YOUR
WEATHER
STATION
To fully customize thc weethcr station to your local settings andpersonal prefcxcnces,the
following settingsare required. Pleaserefer to the appropriate sections for detailed instructions
as below
REQUIRED:
Setting the sea level pressure.
orriONAL:
•
Setting up
Alerts
• Setting up the Daily Rainfall Alerts (Rain Mode)
•
Setting up thc Wind Alerts (Winds Mode)
M ode)
56
2.4.1
PRESSURE
PARAMETERS
This part of the display indicates the current pressure,sealevel pressure,and
A
Of
also be viewed. such as
the
24 hours, moon
the previous
tcmpcraturc,"humidity hi*tory bar-chart.
Pressurevalues may be displayed inHg- hPw;rnBaror mmHg. and altitude values may bc
displayed in mctcrs or fect.
ACCESSING
PRESSURE
AND
WEATHER
From the main console unit [ A ] or [ V luntil the weather foxecasticon
VIEWING
PRESSURE
AND ALTITUDE
In Pressure Mode, cach preys of [ SET I rotates display between;
•
Local pressure
• Scalevel pressure
• Absolute pressure or local pressure is the actual atmosphere pressuxe measured by the
main
unit.
• Relative pressure is refetred as 3ealevel's pressute and has to be adjusted first to your
local
altitude.
• You can set the relative atmospheric pressure directly or via the local altitude_ For the
most exact adjustment we recommend to set the relative atmospherac pressure directly.
SETTING OF
ATMOSPHERIC
• Ask far the present atmosphenc pressure of your home area (local weather setvice, wwev,
optician, calibrated iustauments IL public buildings: ailport).
J , Jn
Mode, press
SET 1
2, Press andhold [ SET l. The SeaLevel Pressuredisplay should be flashing,
3, Set Sca Lcvcl
Pressure;
[ A I or [
] to adjust value. Pressand hold cither button for fast advance.
Press [ SET ] to confirm your selection.
upon completion the display will be returned to Pressure Mode.
SETTING
THE
PRESSURE
AND
ALTITUDE
1.
Set Local
Pressure
Units:
Press [ SET ] until local pressureis displayed
Press and hold
MEMORY
[
I
I to adjust the unit (hPa.•inBar, mmHg, inHg)
press I MEMORY
I to
your selection,
2,
Set Altitude
Unite
Press [ SET ] until Allilude is displayed
Press and hold [ MEMORY
]
[ A ] or [ V ] to adjust the unit (meter/feet)
Prcss I MEMORY
to confirm your sclcction.
MOON
PHASE
phase.
sea.level pressure values
and
39 days,
RSa pressure/
FORECAST
MODE
starts flashing.
DATA
I -neal altitude
PRESSURE (RECOMMENDED)
prcssure is displayed,
UNITS
57
Werbung
