Werbung
6. Set the power level of the cooking zone to « 9 » using the
+
«
» -
SENSOR
cooking zone displays the set power level (« 9 »).
+
7. Touch the «
AUTOMATIC HEATING FUNCTION
cooking zone displays now « A » and « 9 » alternately.
The heating and the elapse of the heating time start
immediately.
-
8. Now use the «
this cooking zone should continue to operate after the
heating time at the highest power level has elapsed (e.g.
power level « 6 »). The indicator of the cooking zone
displays now « A » and « 6 » alternately.
9. At this setting, the corresponding cooking zone heats for 2 minutes and 30
seconds at power level « 9 » (see also table below: « S
THE CORRESPONDING AUTOMATIC HEATING TIMES AT THE HIGHEST POWER
»).
LEVEL
10. After the heating time at the highest power level has
elapsed, the corresponding cooking zone continues to
operate at the previously set power level (here in this
example: power level « 6 » / s. step 8.). The alternating
indicator goes off and the indicator of the cooking zone
displays the power level « 6 ».
11. A
FTER THE COOKING PROCESS IS FINISHED
completely using the « O
STOP COOKING
H
OW TO DEACTIVATE THE AUTOMATIC HEATING FUNCTION
After 30 seconds have elapsed since the automatic heating function was
activated, touch the «
The heating function is deactivated immediately.
. The indicator of the corresponding
» -
once again to activate the
SENSOR
» -
to set the power level at which
SENSOR
/ O
N
FF
).
-
» -
SENSOR
. The indicator of the
: always switch off the appliance
» -
(see also chapter 4.3.4 H
SENSOR
to deactivate the automatic heating function.
~
~
76
«
»
«
» «
«
» «
ET POWER LEVELS AND
«
»
OW TO
»
»
Werbung
