Werbung
3. Install the fixing brackets on the housing of the appliance (s. the following
description).
a. Leave the hob upside down on the towel / cloth.
b. Do not exert any physical force to the control elements of the appliance.
c. Install the fixing brackets (F) on the sides of the hob using the corresponding
screws: screw the fixing brackets into the pre-drilled holes (as shown in the fig.
below). The open side of the fixing brackets must point towards the top of the
hob (glass ceramic), as shown in the lower right-hand fig.
B
C
F
4. Insert the hob into the installation opening and push it downward carefully until
the hob is in firm contact to the worktop (H / s. fig. below).
The hob must be in the installation opening of the worktop properly and firmly.
Check the seal for perfect fit and overall cover.
M
OUNTING OF THE FIXING
BRACKETS
Fig. similar: modifications are possible.
T
OP OF THE HOB
B
OTTOM OF THE HOB
F
IXING BRACKETS INCL
~
65
(glass ceramic)
.
(4 in total)
SCREWS
~
Werbung
