Description Of The Appliance; Assembly Of The Appliance; Using The Appliance - Mpm Mod-55 Bedienungsanleitung

DESCRIPTION OF THE APPLIANCE

1. On/Off button
2. Power cord retractor button
3. Display
4. Suction power controller button (+)
5. Suction power controller button (-)
6. Accessory compartment lid
7. Accessory compartment lid button
8. Suction hose connection hole
9. Suction hose
10. Suction hose retaining ring
11. Suction hose holder
12. Control panel in the suction hose
holder
13. Battery cover
14. Battery location
15. Telescopic tube
16. Carrying handle
17. Top cover
18. Upper lid opening button
NOTE: THE REMOTE CONTROL PANEL IS POWERED BY TWO AAA/LR03 1.5V
BATTERIES. THE BATTERIES ARE NOT SUPPLIED WITH MOD-55.

ASSEMBLY OF THE APPLIANCE

1. Press the two latches on the suction hose retaining ring (10), then insert the ring into the hole (8)
and release the latches. In order to disassemble these elements press the latch and remove the
ring (10) from the hole (8).
2. On the other side of the suction hose (11), connect the telescopic tube (15). At the end of the
telescopic tube (15) put on one of the suction attachments (29), (30), (31), (32), (33+34) or (35).
3. Remove the battery cover (13) in the suction hose holder (11) and install two AAA/LR03 1.5V
batteries in the battery mounting location (14). Batteries are not part of equipment of the vacuum
cleaner. Reattach the battery cover (13).
4. Changing the length of the telescopic tube (15) is possible by pressing the ring in the centre of the
telescopic tube.

USING THE APPLIANCE

1. Before switching on the vacuum cleaner, unfold the power cord (36) to the appropriate length and
insert the plug into the mains socket. When unfolding the cord, do not press the cord retractor
button (2).
2. Press the switch button (1) to switch on the vacuum cleaner.
3. To retract the power cord, press the cord retractor button (2) and hold the cord to prevent sudden
shuffling that could damage the cord.
4. While vacuuming, you can adjust the suction power using the buttons (4) and (5) and the control
panel located in the suction hose holder (12). The vacuum cleaner's display (3) shows the current
suction power level, which is indicated by numbers from 1 to 5 and symbols that show, by way of
example, what the recommended power levels are for:
19. Parking space
20. Motor sponge filters x 2 pcs
21. HEPA filter
22. Outlet sponge filter
23. Outlet filter protection grille
24. Dust bag
25. Dust bag rack
26. Lower casing
27. Small front wheel
28. Large rear wheels
29. Floor and carpet brush
30. Small brush
31. Crevice attachment
32. Floor brush
33. Small turbo brush
34. Small turbo brush adapter
35. Long crevice attachment
36. Power cable
EN
27