Entsorgung; Before Initial Use; Important Notices - Cleanmaxx 11377 Gebrauchsanleitung

DE
•

Entsorgung

Das Verpackungsmaterial umweltgerecht entsorgen und
der Wertstoffsammlung zuführen. Soll das Produkt nicht
mehr verwendet werden, auch dieses umweltgerecht
entsorgen.
Kundenservice / Importeur:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Deutsch-
land •
✆
*) Anruf in das deutsche Festnetz zum Tarif Ihres Anbieters.
Alle Rechte vorbehalten.
Dear Customer,
We are delighted that you have chosen this spray mop. If you
have any questions about the product and about spare parts/
accessories, contact the customer service department via our
website: www.ds-group.de/kundenservice
Symbols
Danger symbols: Read through the associated safety
notices carefully and follow them.
Supplementary information
40°C delicate wash
Do not bleach
Do not dry in a tumble dryer
Do not iron
Do not treat with solvents

IMPORTANT NOTICES

■ This product is suitable for wet cleaning of smooth surfaces
(floors, stairs etc.). The side of the mop cloth with chenille
is suitable for dry wiping, whereas the microfibre side is de-
signed for wet cleaning.
■ The product is designed for personal use only and is not
intended for commercial applications.
■ The product should only be used as described in the operat-
ing instructions. Any other use is deemed to be improper.
■ The warranty does not cover faults caused by incorrect
handling, damage or attempted repairs. The same applies to
normal wear and tear.
■ Keep the packaging material away from children and animals.
There is a danger of suffocation.
■ Use only original accessories from the manufacturer.
■ Protect the product from flames and other heat sources, per-
sistent moisture and impacts.
Soll der Mopp auseinander genom-
men werden, die Rastnasen am
Stiel und Reinigungsfuß drücken
und gleichzeitig die Teile auseinan-
der ziehen.
+49 38851 314650 *)
Items Supplied and Product Overview
Check the items supplied for completeness and the components
for transport damage. If you find any damage, do not use the
product but contact our customer service department.
Remove any possible films, stickers or transport protection from
the product.

Before Initial Use

L
Water residues in the water tank are attributable to quality
checks.
1. Insert the upper shaft (3) into the lower shaft (4) until you hear
it engage.
2. Plug the lower shaft into the shaft holder on the cleaning
foot (9) until you hear it engage.
3. Clean the product with a damp cloth and mild detergent to
remove any possible production residues.
Use
PLEASE NOTE!
■ Make sure when cleaning laminate floors that not too much
cleaning liquid is sprayed onto the floor as otherwise the
laminate could swell!
1. Detach the water tank (5) from the
2. Unscrew the lid from the water tank.
3. Pour water and if necessary a little
4. Screw the lid onto the water tank and place it with the lid first
into the spray head. Make sure that the water tank engages
in place.
5. Place the mop cloth around the cleaning foot (9) and close
the hook-and-loop fastener.
6. Start cleaning the floor: Press the spray trigger (2) a few
times to wet the floor.
7. Wipe the mop cloth over the wet floor. Press the spray trigger
a few more times if necessary.
8. Flip over the cleaning foot and wipe
•
1 Handle
1
2 Spray trigger
2
3 Upper shaft
4 Lower shaft
5 Water container
(max. 720 ml)
6 Spray head
3
7 Spray nozzle
8 Flexible extension
9 Cleaning foot and mop
4 cloth (with 2 sides: che-
nille and microfibre)
5
6
7
8
9
spray head (6): To do this, untwist
the holder which fixes the water
tank in place at the top until it is
released. The water tank can then
be detached.
cleaning agent into the water tank.
the wet floor dry with the other side
of the mop cloth.
If the flexible extension (8) is to
be used for areas that are hard to
reach, press the grey button on the
Z 11377 M DS V1 1222 mh
EN