S+S REGELTECHNIK HYGRASGARD RFTF-wModbus Bedienungs- Und Montageanleitung Seite 14

G U
HYGRASGARD
Schematic diagram
ON
1 2 3 4 5 6 7 8
address
1 2 3 4
ON
DIP A
1 2 3 4 5 6 7 8
address
pair L1
Manual offset adjustment
The sensors are pre-set and calibrated at the factory.
For subsequent adjustment of the measured value,
there are two offset potentiometers (A and B) available.
Range of adjustment approx. ± 5 °C ⁄ ± 9 °F (A) or ± 10 % RH (B).
Type ⁄ WG02
RF TF-wModbus
Note: System of units SI (default) or imperial (can be changed via Modbus).
ACCESSORIES
GW-wModbus
Gateway with W-Modbus (Wireless) for radio-based connection to Modbus networks,
operating modes 'Gateway' (basic function as a base station)
and 'Node' (adapter function for max. 1 wired sensor)
GW-wModbus Pro and 'Node Pro' (adapter function for max. 16 wired sensors)
®
RFTF - wModbus
HYGRASGARD
RFTF - wModbus
A offset B
DIP A
pair L1 L2
LED: Telegram Status
DIP A: Bus address
Button: Teach-in (pair)
LED 1: Network Status
L2
LED 2: Connection quality
Measuring Range ⁄ Readout
Humidity (switchable)
0...100 % RH (default)
0... 80 g ⁄ kg (MV)
3
0... 80 g ⁄ m (AH)
0... 85 kJ ⁄ kg (ENT.)
0...+50 °C (DP)
®
Output
Temperature
–35...+80 °C /
W-Modbus (Wireless)
–31...+176 °F
14
Rev. Data - V26
Item No.
1201- 41B F-10 00-000
18 01-1211- 1101- 000
18 01-1211- 1101- 100