6.2
Post-connection check
Is the device or cable undamaged (visual check)?
m
Do the cables comply with the requirements ?
m
Do the cables have adequate strain relief?
m
Are the cable glands mounted and firmly tightened?
m
Does the supply voltage match the specifications on the nameplate?
m
Is the wiring correct?
m
3-wire DC-PNP: If required, is the functional earth connected?
m
2-wire C/DC: Has the protective ground connection been established?
m
If supply voltage is present, is the green LED lit?
m
60
60
ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
Endress+Hauser