Operational Safety; Product Safety - ACS Vibrocont SHM-300 Bedienungsanleitung

2.4

Operational safety

Risk of injury!
‣
Operate the device in proper technical condition and fail-safe condition only.
‣
The operator is responsible for interference-free operation of the device.
2.5

Product safety

This measuring device is designed in accordance with good engineering practice to meet state-
This measuring device is designed in accordance with good engineering practice to meet stateof-
of-the-art safety requirements, has been tested, and left the factory in a condition in which it
the-art safety requirements, has been tested, and left the factory in a condition in which it
is safe to operate. It meets general safety standards and legal requirements. It also complies
is safe to operate. It meets general safety standards and legal requirements. It also complies
with the EC directives listed in the device-specific EC Declaration of Conformity. Endress
with the EC directives listed in the device-specific EC Declaration of Conformity. This is confirmed
+Hauser confirms this by affixing the CE mark to the device.
by affixing the CE mark to the device.
Endress+Hauser
ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
41
41