Mounting The Measuring Device; Required Tools - ACS Vibrocont SHM-300 Bedienungsanleitung

5.2 5.2

Mounting the measuring device

Mounting the measuring device
Service in accordance with WHG: Prior to mounting the device, pay attention to the WHG Service in accordance with WHG: Prior to mounting the device, pay attention to the WHG
approval documents. The documents can be found in the Download Area of the Endress approval documents. The documents can be found in the Download Area of the Endress
+Hauser website: +Hauser website:
5.2.1 5.2.1

Required tools

Required tools
• Open-ended wrench: only turn by the hex bolt when screwing in. • Open-ended wrench: only turn by the hex bolt when screwing in.
Maximum torque: ≤ 30 Nm (22 lbf ft). Maximum torque: ≤ 30 Nm (22 lbf ft).
• Socket wrench: The socket wrench AF32 is available as an accessory →  65. • Socket wrench: The socket wrench AF32 is available as an accessory →  65.
Pay attention to the temperature and pressure specifications for seals and clips used at Pay attention to the temperature and pressure specifications for seals and clips used at
the customer site. the customer site.
View, dimensions in mm (in) View, dimensions in mm (in)
32 mm 32 mm
1 1 Flat seal Flat seal
2 2 Weld-in adapter Weld-in adapter
32 mm 32 mm
52 52
52
ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
www.endress.com → Download www.endress.com → Download
63.9 (2.52) 63.9 (2.52)
38 (1.5) 38 (1.5)
2 2
1 1
A0022025 A0022025
66.4 (2.6) 66.4 (2.6)
47.9 (1.8) 47.9 (1.8)
A0022026 A0022026
Description Description
Thread accessory weld-in adapter Thread accessory weld-in adapter
Example G ¾" Example G ¾"
Pressure and temperature (maximum): Pressure and temperature (maximum):
• +25 bar (+362 psi) at +150 °C (+302 °F) • +25 bar (+362 psi) at +150 °C (+302 °F)
• +40 bar (+580 psi) at +100 °C (+212 °F) • +40 bar (+580 psi) at +100 °C (+212 °F)
 
When using a weld-in adapter with flush-mounted seal, When using a weld-in adapter with flush-mounted seal,
the flat seal (1) supplied must be removed from the thread. the flat seal (1) supplied must be removed from the thread.
Metric thread in customer nozzle Metric thread in customer nozzle
Pressure and temperature (maximum): Pressure and temperature (maximum):
+40 bar (+580 psi) at +150 °C (+302 °F) +40 bar (+580 psi) at +150 °C (+302 °F)
Endress+Hauser Endress+Hauser