ACS Vibrocont SHM-300 Bedienungsanleitung Seite 48

5.1.4 Buildup
Make sure that the installation socket does not exceed a certain length so that the tuning fork
can project freely into the vessel.
Possibilities for optimization:
• A vertical orientation of the point level switch keeps buildup to a minimum.
• Preferably flush-mounted on vessels or in pipes.
 17 Buildup on tank wall, pipe wall and tuning fork
5.1.5 Weld-in adapter with leakage hole
If installed horizontally, ensure that the leakage hole is pointing down. This allows leaks to be
detected as quickly as possible.
48
48
ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
A0022057
Endress+Hauser