Home View - Hitachi Pc-Arfh2E Installations- Und Bedienungsanleitung

1.8 Home view

Water pressure
Room air temperature
External ambient
temperature
Home view shows on the middle the date and time
On the left side it shows:
• Inside temperature (home icon):
✓ If LCD works as Room 1, it took it from the controller sensor or auxiliary sensor
✓ If LCD works as Room 2, it took it from the controller sensor or auxiliary sensor
✓ If LCD works as Room 1+2, it took it from the controller sensor or auxiliary sensor, or the
average of the ones used per each zones.
✓ If LCD is water but not room, it will took them from the configured Rooms, if no one is
configued, that temperature will not be displayed.
✓ If LCD works as main LCD or water control but not room, it will took them from the
configured Rooms, if no one is configured, that temperature will not be displayed.
• Outside temperature (thermometer icon).
• Water pressure indicator is shown when LCD is Unit or Unit + Room (Not available for YUTAKI M
units)

NOTE
Room temperatures are not shown if LCD is only "Unit" and there are no thermostats configured.
PMEN0597 rev.1 - 06/2023
Hour
Date
1
36