AVer M70Wv2 Bedienungsanleitung Seite 7

Device Connection
Power Connection and Charging
1
Plug in power adapter and turn on M70Wv2.
[Note]

Please full charge the camera for the first time use.

When the camera is power on, the camera is in "Standby" mode. In standby mode, it can
be charging with the USB connection between other devices; but the power supply is
required 5V3A and the charging time will be longer.

The laptop, projector, or monitor cannot provide the power through the USB connection to
the camera while the camera is operating.

When the camera is charging with the wall outlet, the battery indicator is in green flashing.
 Press + to reboot when the camera doesn't work properly.
English-5