Cleanmaxx VC9391 Gebrauchsanleitung Seite 19

Carpet Cleaner
BEFORE INITIAL USE
L
A cross­head screwdriver is required
for assembly.
1. Insert the handle (1) into the opening
of the container support (14) and align
it so that the curved end of the handle
points towards the back of the device.
Fix the handle in place using the two
screws that are supplied with the device.
2. Insert the fresh water container (2) into
the container support.
this, make sure that the locking lugs
on the fresh water container fit in the
recesses in the
the fresh water container against the
handle until you hear it engage.
The dirty water container (8) is already
inserted in the main unit.
USE
Preparing the Carpet
1. Vacuum the carpet or upholstered furni­
ture which is to be cleaned thoroughly
with a vacuum cleaner. If possible, use a
brush attachment to do this.
2. If possible, remove all furniture from the
carpet. In the case of large items of furni­
ture which cannot be moved to one side,
07948_DE-EN-FR-NL_A5_V2.indb 19 07948_DE-EN-FR-NL_A5_V2.indb 19
When you do
container support. Press
place plastic film below or around the
feet and only remove it once the carpet
has completely dried after it has been
cleaned. The feet could be damaged by
the moisture from the carpet.
3. Check the colourfastness of the
carpet or upholstered furniture. Soak
a piece of white fabric with the cleaning
solution supplied (see the "Preparing
the Device / Filling the Fresh Water
Container" section) and rub it carefully
on an inconspicuous spot on the carpet.
If the white fabric does not become
discoloured, the carpet or upholstered
furniture can be cleaned with the device.
In the case of carpets or upholstered
furniture with several colours, test the
fastness of each colour.
Preparing the Device /
Filling the Fresh Water Container
Please Note!
■
Only ever pour the cleaning agent sup­
plied with the device or standard carpet
cleaning products for carpet cleaners
into the fresh water container.
■
Do not use any cleaning products that
produce a lot of foam as excessive
foaming impedes the functioning of the
device.
■
Never operate the device without water.
1. Press the release lever of the fresh water
container (15) upwards. The fresh water
container (2) is released from the locking
mechanism.
2. Remove the fresh water container from
the device.
EN
19
12.02.2024 16:19:44 12.02.2024 16:19:44