Lionelo Levi One i-Size Bedienungsanleitung Seite 15

5. Put the belt covers through the oop (fig. 28) and then remove them by putting them
through the corresponding
SEAT REMOVAL
Unbuckle the car seatbelt and remove it from the guides. Remove the seat from the car.
REMOVING AND
1. To remove the seat cover, fol ow these steps:
2. Unfasten the metal clasps ocated at the back of the headrest cover, and remove
the cover by pulling it upwards (fig. 30).
Remove the backrest cover by pulling it upwards (fig. 31).
3.
Remove the seat base cover by pulling it upwards (fig. 32).
4.
To reattach the cover, fol ow the above steps in reverse order.
CLEANING AND
Minor dirt should be cleaned with a damp sponge and a mi d detergent.
The cover can be washed at a maximum temperature
the cover must be complete y removed from the seat (see: Removing the cover).
Do not use a tumble dryer when drying. The cover should not be exposed to the
sun for drying. Plastic parts can be cleaned using a damp cloth and mi d detergent.
Note! Do not use strong detergents or bleaching agents.
The photos are for i ustrative purposes only, the actual appearance of the products may
holes in the backrest (fig. 29).
ATTACHING
MAINTENANCE
differ from those shown in the photos.
-15-
THE COVER
of 300C. For this purpose,
EN