Hitachi DAT-88EX Bedienungsanleitung Seite 9

Notes:
mRecording monitor
When the Record button is pressed, the DAT-
88EX
enters the
recording monitor
mode
but the
mechanism
does not operate so that you can adjust
the recording level and monitor the digital input.
@To erase the recorded sound
Recording on a recorded tape automatically erases
the
previous sound.
To erase the
previous sound
without recording new sound, set the Record level
control knobs (6) to "0" and perform analog record-
SUBCODES
ST-ID
=> ST-iD mp SK-ID
Recording of start IDs (automatic)
Recording of start IDs (manual)
Recording of skip IDs (manual)
.... After recording of subcodes
(Refer to "To record subcodes during playback"
on page 11.)
ST-ID
ST-ID SK-ID => RENUMBER
aa nd ID-EDIT
Subcodes record mode Function
ST-ID Recording or erasing of start IDs
SK-ID Recording or erasing of skip IDs
RENUMBER Renumber the tunes
ST-ID
ID-EDIT
Correcting the start IDs
Note:
When the DAT-88EX performs additional recording
on a tape previously recorded by another DAT or re-
records subcodes, the subcodes may not be recorded
correctly.
Englis